Service
Our Services
Docking & Undocking
- Shiplift Systexm : Capable of lifting up to 7665 tons, allowing us to handle vexant size.
- Ship & Module Transfer System : With a 10,000-ton capacity, this system ensures efficient movement of large vessels.
- Dry Docks : We offer six dry docks: three measuring 120m x 40m and three at 150m x 40m, accommodating a variety of vessel sizes.
- Wet Berth : Our 260m long, 10m deep wet berth provides ample space for vessel operations.
- Load-In / Load-Out Jetty : Our 80m jetty facilitates easy access for Load-In/Load-Out operations of offshore structures and heavy components.
Docking and undocking ships with a length of up to 140 meters, utilizing a table measuring 116 meters by 26 meters, and a lift capacity of up to 7665 tons, with a maximum draft of 6.0 meters.
Syncrolift system supplied by Rolls Royce
Ship & Module Transfer System supplied by IMG, Totali lift capacity 10,000T, Load levelling technology, Serves all six dry berths.
Dry Berths 120m * 40m = 3
Dry Berths 150m * 40m = 3
Wet Berth 260m @ 10m Depth
Load-In– Load-Out jetty -80m
Our Services
Docking & Undocking
Docking & Undocking
- Shiplift Systexm : Capable of lifting up to 7665 tons, allowing us to handle vexant size.
- Ship & Module Transfer System : With a 10,000-ton capacity, this system ensures efficient movement of large vessels.
- Dry Docks : We offer six dry docks: three measuring 120m x 40m and three at 150m x 40m, accommodating a variety of vessel sizes.
- Wet Berth : Our 260m long, 10m deep wet berth provides ample space for vessel operations.
- Load-In / Load-Out Jetty : Our 80m jetty facilitates easy access for Load-In/Load-Out operations of offshore structures and heavy components.
Docking and undocking ships with a length of up to 140 meters, utilizing a table measuring 116 meters by 26 meters, and a lift capacity of up to 7665 tons, with a maximum draft of 6.0 meters.
Syncrolift system supplied by Rolls Royce
Ship & Module Transfer System supplied by IMG, Totali lift capacity 10,000T, Load levelling technology, Serves all six dry berths.
Dry Berths 120m * 40m = 3
Dry Berths 150m * 40m = 3
Wet Berth 260m @ 10m Depth
Load-In– Load-Out jetty -80m
Blasting & Painting
Blasting & Painting
We specialize in providing top-notch industrial services to meet all your needs. Our expertise includes:
Surface Preparation
Proper surface preparation is crucial for the success of any coating or painting project. Our surface preparation services include abrasive blasting, power tooling, and more other services to ensure a clean and smooth surface ready for the next step.
Our Services include:
- Grit blasting (SA1, SA2, SA2.5)
- Hydro-blasting
- Hard scraping, Degreasing, Power tooling, Chipping
- Spray painting, Superstructure painting
- IMO & IWS, Plimsoll and Draft marking, Cutting line
Tank Cleaning
Our Services include:
- Anchor & anchor chain locker cleaning and painting
- Bilge cleaning and painting
- Sea chest cleaning
- Sewage tank
- Sludge tank
- Cargo Hold cleaning
Equipment and Facilities:
- Rope access
- Scaffolding services
- Hydro-blasting machine
- HP washing machine (3000 psi)
- Cherry picker
- Cleaning compressor
- Fuel tank for storage
- Waste oil and Sewage tanks
- Blasting chamber
Steel / Hull
Steel / Hull
Precision Engineering for Optimal Vessel Performance
Comprehensive Hull Repair
- Structural Integrity : Expertly repair and reinforce bottom, side, deck, and platform structures, including intricate stiffeners.
- Watertight Compartments : Maintain vessel safety with precise repairs to transverse and longitudinal bulkheads.k, and platform structures, including intricate stiffeners.
- Cargo Handling Efficiency : Restore hatch covers to optimal condition through expert plating and stiffener repair.
- Above-Deck Structures : Revitalize superstructures and wheelhouses to enhance vessel aesthetics and functionality.
Beyond the Hull
Our expertise extends to:
- Essential Fittings : Repair and replace portholes, doors, gangways, and other vital components for seamless vessel operation.
- Deck Equipment Restoration : Maintain deck functionality with expert repairs to bollards, chocks, hawse pipes, and signal masts.
- Foundation Support : Create robust foundations for various on-board equipment.
- Metal Fabrication : Restore and manufacture hull components and machine parts with precision welding.
- Modernization : Design and fabricate new hull components to meet evolving vessel requirements.
Our robust equipment are as follows
- Workshop for outfitting and steel fabrication.
- CNC plate cutting machine.
- Pug cutting machines.
- FCAW , SMAW and SAW welding machine,
Uncompromising Quality
We employ cutting-edge welding techniques and materials, ensuring the highest standards of workmanship. Our certified specialists deliver exceptional results, whether on-board or in our state-of-the-art workshop.
Trust us to safeguard your vessel’s structural integrity and performance.
Piping
Piping
The shipyard has a well-equipped workshop, where highly experienced piping engineers, holding requisite welding certificates, lead a proficient technical team. Our qualified Tig and Arc welders have garnered accolades from satisfied clients, showcasing our commitment to delivering exceptional work.
List of Tools & Equipment:
- Arc Welding machines
- Tig & Arc welding machines
- Pedestal drilling machine
- Manual & hydraulic operated pipe bending machines
- Pipe fabrication Bays in the workshop
- Piping Profile cutting Machine
We specialize in servicing a diverse add range of marine vessels, including:
- TSHD Dredgers, CSHD Dredgers, Offshore Supply Vessels, AHT Vessels (Anchor Handling Tug), Passenger Ships, Casino Vessels, Tug Boats.
- Our expertise extends to the maintenance and repair of this varied fleet, ensuring optimal performance for each vessel type.
We handle a comprehensive range of services for offshore vessels, platforms, and jack-up rigs, including:
- Maintenance and repair of all offshore vessels, offshore platforms, and jack-up rigs.
- Comprehensive attention to all types of piping systems in both repair and new building projects.
- Piping system involvement in conversion projects.
- Renewal of high-pressure lines in offshore rigs with pre-heating post weld heat treatment.
- Fabrication of sea chest strainers of all types.
- Fabrication and testing of high-pressure hydraulic lines for anchor winches, lifeboat davits, deck cranes, cargo hatches, as well as high-pressure choke & kill lines, Cumi hydraulic lines, and well test lines in rigs.
- Onboard chemical cleaning and flushing of hydraulic lines.
- Specialization in stainless steel pipes and Cuni pipes systems.
- Fabrication and installation of dredge suction & discharge lines in dredgers.
- Fabrication and installation of overflow ducts in dredgers.
- Heli pad structure fabrication.
- Repair of crane boom bracings.
- Renewal of PVC pipes for accommodation lines on vessels.
- Fabrication and installation of main engine exhaust pipes.
- Exhaust pipes, heat-resistant insulation, and cladding work.
- Repairs, alignment, and installation of raw water towers at locations in rigs.
Mechanical
Mechanical
We operate a fully equipped and spacious Heavy Engineering workshop, specializing in complete propulsion and deck machinery in-house repair and services.
Our workshop is outfitted with a range of advanced machinery and tools, including:
- Advanced 4-axis NC Horizontal Boring Machine
- Lathe machines
- Advanced vertical milling Machine
- Surface Grinder & Slotter Machine
- Vertical Drilling machines
- Pneumatic & Hydro Testing Bay
- Chemical & Acid Compatible Cleaning Tanks
- 10T remote-controlled EOT Crane
- Lapping Stands
- All ranges of calibrated instruments set
- Load tested & certified lifting gears and tools for safe handling
Our workshop is outfitted with a range of advanced machinery and tools, including:
- Complete repair solutions for Propulsion & Propeller shafting, rudder of all types & makes CPP Hub, Propeller Blades skimming and balancing, Azimuth Thrusters & Tunner Thrusters overhauling with in-house machining of components with accuracy within 10 microns.
- Stern Tube in situ repairs & bearing renewals
- Laser Sighting & Alignment
- In-Situ Machining & Shaft repairs
- Bearings & Shaft sleeves renewals
- Underwater FRP & GRP application
- Shaft trueness checking
- Hydraulic Torque Services
- Winches Overhauling
- Boat Davit & Electro Hydraulic Crane overhauling
- Wire rope renewal, resocketing & load testing
- Pump & Valves repair
- Relief valve servicing and calibrations
- Compressor & Refrigeration repairs
Our Mechanical Department is led by ship repair experts with more than 20 years of international experience. We have a team of professional, young, and energetic engineers to attend, control, monitor, and execute critical repair activities, ensuring timely completion.
Electrical
Electrical
In our fully equipped electrical workshop, we specialize in the complete overhauling of electrical motors, alternators, and switchgears.
Our workshop features:
- Motor baking oven
- Electrical test panel
- VFD & Soft starter test panel
- Thermal scanner
- Various advanced test equipment
- 1.5-ton workshop crane
- Jet wash machine
- Surface Grinder machine
- Vertical drilling machine
- A full range of calibrated instruments
- Load-tested & certified lifting gears and tools for safe handling
Our services include:
- Shaft generator overhauling with CO2 cleaning
- Retrofitting of all types of control panels, as well as new electrical and automation system installation
- Rewinding of all types of motors and alternators
- Cable laying and termination work
- Load trials of alternators and shaft generators
- Balancing of rotors and blower impellers
- Bearings & Shaft sleeves renewals
Our Electrical Department is led by ship repair experts with more than 20 years of international experience. We have a team of professional, young, and energetic engineers to attend, control, monitor, and execute critical repair activities with timely completion.
QA / QC
QA / QC
Delivering Quality through Rigorous Inspection
Our dedicated QA/QC team ensures the highest standards of quality in every project. With a deep understanding of steel and piping welding, coupled with expertise in non-destructive testing (NDT) and adherence to international codes, we deliver precision and reliability.
Delivering Quality through Rigorous Inspection
Core Competencies:
- Expert Inspection: Our team excels in steel and piping welding inspections, ensuring structural integrity.
- Tightness Assurance: Rigorous testing guarantees leak-free systems and optimal performance.
- NDT Proficiency: Employing advanced NDT techniques (MT, PT, UT, RT), we identify potential defects with precision.
- Adherence to Standards: Strict compliance with international rules and codes ensures safety and quality.
- Precision Measurement: Accurate measurements are the cornerstone of our quality control processes.
Certified Professionals and Advanced Equipment:
Our team boasts certified personnel with IRS, CSWIP, and ASNT credentials, backed by state-of-the-art equipment, including:
- MPI and DPT kits
- UT and RT equipment
- Weld vacuum test kits
- Hose test setups
- Precision measuring instruments
Proven Leadership and Experienced Team:
Led by a seasoned professional with over 16 years of experience in ship, rig, and conversion projects, our team combines expertise with youthful vigor. We excel in handling complex repair, conversion, and dismantling projects.
Trust our QA/QC team to deliver exceptional quality and compliance.
